• Document: Lexmark X264dn, X363dn, X364dn, and X364dw. Maintenance Guide
  • Size: 376.9 KB
  • Uploaded: 2019-05-17 00:17:10
  • Status: Successfully converted


Some snippets from your converted document:

Lexmark X264dn, X363dn, X364dn, and X364dw Maintenance Guide September 2009 www.lexmark.com Contents Maintaining the printer................................................................................3 Cleaning the exterior of the printer..........................................................................................................3 Cleaning the scanner glass........................................................................................................................3 Cleaning the ADF separator rollers............................................................................................................4 Storing supplies.........................................................................................................................................5 Checking the status of supplies from a network computer......................................................................5 Moving the printer to another location....................................................................................................6 Shipping the printer..................................................................................................................................6 Ordering supplies......................................................................................................................................7 Ordering toner cartridges...................................................................................................................................7 Ordering a photoconductor kit...........................................................................................................................7 Ordering ADF replacement parts........................................................................................................................8 Replacing supplies.....................................................................................................................................8 Replacing the toner cartridge.............................................................................................................................8 Replacing the photoconductor kit.....................................................................................................................10 Contents 2 Maintaining the printer Cleaning the exterior of the printer 1 Make sure that the printer is turned off and unplugged from the wall outlet. CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding. 2 Remove all paper from the printer. 3 Dampen a clean, lint-free cloth with water. Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of the printer. 4 Wipe only the outside of the printer. Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer. 5 Make sure all areas of the printer are dry before beginning a new print job. Cleaning the scanner glass If you encounter print quality problems, such as streaks on copied or scanned images, clean the areas shown. 1 Slightly dampen a soft, lint-free cloth or paper towel with water. 2 Open the scanner cover. 1 White underside of the ADF cover 2 White underside of the scanner cover 3 Scanner glass 4 ADF glass Maintaining the printer 3 3 Wipe the areas shown and let them dry. 4 Close the scanner cover. Cleaning the ADF separator rollers After you have copied over 50,000 copies using the ADF, clean the ADF separator rollers. 1 Open the ADF cover. 2 Unlock the separator roll. 3 Remove the separator roll. 4 Use a clean, lint-free cloth dampened with water to wipe the separator rollers. Maintaining the printer 4 5 Reinstall the separator roll. 6 Lock the separator roll. 7 Close the ADF cover. Storing supplies Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them. Do not expose supplies to: • Direct sunlight • Temperatures above 35°C (95°F) • High humidity above 80% • Salty air • Corrosive gases • Heavy dust Checking the status of supplies from a network computer Note: The computer must be connected to the same network as the printer. Maintaining the printer 5 1 Type the printer IP address into the address

Recently converted files (publicly available):