• Document: Looping Embroidery) OWNER S MANUAL.
  • Size: 1.06 MB
  • Uploaded: 2019-02-13 01:53:57
  • Status: Successfully converted


Some snippets from your converted document:

BECS-C19 (For Chenille/Looping Embroidery)   Version:2012-01      OWNER’S MANUAL www.butterflyemb.com Index Index 1 Introduction Of Functions .................................................................................... 1 2 Shift Between Looping Head & Lockstitch Head ............................................... 1 2.1 Shift Of Head ..................................................................................................... 1 2.2 Introduce To Main Interface In Looping Status................................................... 2 3 Embroidery Procedure For Looping.................................................................... 3 4 Relevant Parameters & Their Setting Methods................................................... 3 5 Machine Test.......................................................................................................... 4 5.1 Thread-Loosing Position Adjustment ................................................................. 4 5.2 Needle Height Position Adjustment.................................................................... 5 5.3 Adjustment Of Color Position............................................................................. 5 5.4 Test D Shaft Motor ............................................................................................. 6 5.5 Test H Shaft Motor ............................................................................................. 6 5.6 Test Chain Main-Shaft ....................................................................................... 6 5.7 Test Chain Main-Shaft Encoder ......................................................................... 6 5.8 Test Chain Cutting Motor ................................................................................... 7 5.9 Test Thread Breakage ....................................................................................... 7 6 Loop Manual Operation ........................................................................................ 8 7 Modification Color-Changing Sequence ............................................................. 8 8 Manual Operation Of Looping Head Switch........................................................ 9 9 Mechanical Action Devices & Their Driving Methods Of Looping Models..... 10 Appendix 1 Parameters At Looping Embroidery ................................................... 11 Appendix 2 Table Of Error ....................................................................................... 15 All Rights Reserved. Shanghai Butterfly Imp & Exp Co., Ltd. BECS- C19 Owner’s manual-For Looping Embroidery I C19 Owner’s manual(For Looping Embroidery) 1 Introduction of Functions — Looping Functions: Compared with the ordinary embroidery type, looping is a new embroidery type, which uses each single loop as a unit. Each independent loop combines together to form the stitch form. This kind of embroidery features the strong 3D effect. — Chain-stitch Functions: Using a single loop as a unit, chain-stitch embroidery creates the stitch form with the loops linking like a chain. — Functions of thread-breakage detection for looping, automatic mending and head-locking. — Automatic or manual shift between lockstitch head and looping head. — Automatic shift between the looping and chain-stitch embroidery — Auto adjustment on height of needle at looping head — Automatic trimming in looping embroidery — Before moving the frame manually, the looping head will lift needle to the escaping position; just before the embroidery, the looping head will release the needle — Automatic shift of hooks to change color in looping embroidery. — Manual functions of each mechanical part of looping 2 Shift between Looping Head & Lockstitch Head 2.1 Shift of Head According to the specific requirement on the embroidery, user can shift between the looping head and lockstitch head freely; therefore the user could perform the operations after having selected the proper head. ‹ Operational Procedures: (1) At the stop status in the main interface, press (when the existing head is looping head) or (when the existing head is lockstitch head) to have access to the interface for changing color and switching head manually, as shown in the picture: (2) According to the type of the existing head, the system will ask the user whether to shift from lockstitch head to looping head or to shift from looping head to lockstitch head. (3) Press “Enter” to let machine shift the head. At last, on the main interface, if the head shift button is displayed as and the looping indicator is on, it means the looping head is the working head now; if

Recently converted files (publicly available):