• Document: LATICRETE 9235 Waterproofing Membrane
  • Size: 224.95 KB
  • Uploaded: 2019-05-17 12:15:56
  • Status: Successfully converted


Some snippets from your converted document:

LATICRETE® 9235 Waterproofing Membrane • Applies quickly with a paint brush or roller - no special mixing or application equipment needed • Fast cure - normally ready in hours for finishes • Install tile, brick and stone directly onto membrane • Resistant to brine, urine, sugar & other reagents • Easy cleanup – just use water while fresh • Protects concrete & reinforcing steel from corrosion Suitable Substrates • Concrete • Exterior Grade Plywood* • Cement Mortar Beds • Gypsum Wallboard* • Cement Backer Board*** • Cement Plaster • Ceramic Tile and Stone** • Concrete & Brick Masonry • Cement Terrazzo** *Interior Applications Only; ** If skim coated with a LATICRETE Latex Thin-Set Mortar; PRODUCT DESCRIPTION ***Consult cement backer board manufacturer for specific installation LATICRETE 9235 Waterproofing Membrane is a thin, recommendations and to verify acceptability for exterior use. loadbearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick Packaging installations. A self-curing liquid rubber polymer and a 20 ltr pail reinforcing fabric are quickly applied to form a flexible, seamless waterproof membrane that bonds to a wide variety Colour - Black of substrates. Approximate Coverage Advantages Approximately 225-250 sft per 20 ltr pail • Swimming pools, fountains & water features • Shower pans, stalls, “hop-ups” & tub surrounds Shelf Life • Bathrooms & laundries (industrial, commercial & Factory sealed containers of this product are guaranteed to be of residential) first quality for two (2) years if stored at temperatures >32°F (0 • Spas, hot tubs °C) and <110F° (43 °C). • Kitchens & Food Processing Areas • Terraces & balconies over unoccupied spaces • Countertops Limitations • Facades • Do not use as a primary roofing membrane over occupied • Steam rooms (when used in conjunction with a vapor space barrier) • Do not use over expansion joints, structural cracks or cracks • Inhibits stain causing mold and mildew growth in the with vertical differential movement substratewith Microban® antimicrobial product protection • Do not use over cracks >1/8” (3mm) in width • Safe - no solvents and non-flammable • Do not use as a vapor barrier (especially in steam rooms) • Interior & exterior use • Do not expose unprotected membrane to sun or weather for • Vertical & horizontal surfaces (including ceilings) >30 days • Thin - only 0.02” (0.5mm) thick when cured • Do not expose to negative hydrostatic pressure, excessive • Anti-fracture protection of up to 1/8” (3mm) over shrinkage vapor transmission, rubber solvents or ketones and other non-structural cracks • Must be covered with ceramic tile, stone, brick, concrete, • Load bearing - “Extra Heavy” service rating per ASTM screeds, terrazzo or other traffic-bearing course. Use protection C627/TCA board for temporary cover. • Cold applied – no heating, kettles or fumes • Obtain approval by local building code authority before using product in shower pan applications • Do not install directly over single layer wood floors, Performance 1999 “EXTRA HEAVY” pl

Recently converted files (publicly available):